Installation method of toilet and precautions for

2022-07-22
  • Detail

The toilet is a piece of sanitary ware, which can be said to be extremely needed by every household at present. However, it is not easy to install it, although it is usually installed by professional construction personnel after buying it back. Then, what is the installation method of the toilet? What matters need to be paid attention to in toilet installation? Now let's follow Xiaobian to understand

toilet, a sanitary ware, can be said to be extremely needed by every household at present. However, it is not easy to install it, although it is usually installed by professional construction personnel after buying it back. Then, what is the installation method of the toilet? What matters need to be paid attention to in toilet installation? Now let's follow Xiaobian to understand

1. What is the installation method of the toilet?

first, before the installation of the toilet, check the levelness of the sewage pipe and the ground to see if there is any blockage of sediment, waste paper and other debris in the pipe. At the same time, check whether the position where the toilet is installed is horizontal in front, back, left and right. If the ground is uneven, the ground should be leveled before installation

secondly, confirm the center of the blowdown pipe. The confirmation method is to turn the toilet over, then determine the center on the sewage outlet of the toilet, and draw a cross center line at the center, and the cross center line should extend to the bottom of the toilet and the surrounding feet

moreover, it is to fix the toilet. The installation method of the toilet is to first align the cross line on the toilet with the sewage outlet on the ground, and then ensure that the toilet is installed horizontally, and then press the seal ring tightly, and then install the anchor screws and decorative caps

then, after fixing the toilet, seal the bottom. The method is to install a special sealing ring on the sewage outlet of the toilet, or apply a circle of glass glue or cement mortar around, and the ratio of cement to sand should be 1:3

then, it is time to install water tank accessories. Before installation, flush the pipeline with water for 3-5 minutes. After ensuring the cleanness of the water pipe, install the angle valve and the connecting hose, and then connect the hose with the installed water tank accessories to the water valve, and at the same time, connect the water source

finally, the toilet needs to be inspected to check whether the water inlet valve and seal are normal, whether the installation position of the drainage valve is flexible, whether there will be blockage and leakage, and whether the water inlet valve is equipped with a filtering device

2. Precautions for toilet installation

a. the place where the circle is drawn must be blocked with toilet rubber ring. If it is sealed when leaving the factory, it will be better

b. The toilet sealing ring must be used when installing the toilet, and the glass glue must not be used only around the water outlet to try to prevent the water from leaking out

conclusion: the installation method of toilet and precautions for toilet installation are introduced here. In the process of home decoration, the installation of toilet seems simple, but the specific installation steps and details should be carefully mastered to avoid unnecessary troubles and economic losses to the future home life

成都私密整形医院

济南男科医院

重庆骨科医院

Copyright © 2011 JIN SHI